BatchOpts

Use the BATCHOPTS suboption to specify alternatives to the default settings in the Batch Reanalysis Options display. See Batch reanalysis options.

Figure 1. Syntax

1 BatchOpts ( + ,
2.1 General (…)
2.1 JobCardParms (…)
2.1 JobCardStmts (…)
2.1! ,Cond
2.1 ,Uncond)

BatchOpts COND and UNCOND suboptions

You can specify the COND and UNCOND suboptions at each level of the BATCHOPTS suboption:

COND (conditional) means the selected value is used as the default setting on the display if the user has not already specified a different setting. That is, it applies to a first-time user, or whenever the user clears the setting on the display.

UNCOND (unconditional) means the selected value is used as the current setting on the display at the start of any Z Abend Investigator ISPF interface session, regardless of the previous setting. During the session, the setting can be changed to any other valid value, which remains in effect until the next session.

COND is the default at all levels, unless UNCOND is specified at a higher level. That is, the higher-level specification is by default propagated to each lower level.

In the following example:

FAISPFOPTS(BATCHOPTS(GENERAL(JOBCARDSTYLE(P),JCLEDIT(Y),JOBCARDSTMTS(<stmt1>,<stmt2>),
    JOBCARDPARMS(MSGCLASS(A),COND),UNCOND))
  • JOBCARDPARMS(MSGCLASS(A)) is conditional.
  • GENERAL(JOBCARDSTYLE(P), JCLEDIT(Y), and JOBCARDSTMTS(<stmt1>,<stmt2>) are unconditional.

BatchOpts General suboptions

Figure 2. Syntax

1 General ( + ,
2.1  JobCardSTYle (
2.2.1! P
2.2.1 S
2.2.1! ,Cond
2.2.1 ,Uncond
2.1 )
2.1  JclEdit (
2.2.1 Y
2.2.1! N
2.2.1! ,Cond
2.2.1 ,Uncond
2.1 )
2.1  Redisp (
2.2.1 Y
2.2.1! N
2.2.1! ,Cond
2.2.1 ,Uncond
2.1 )
2.1! ,Cond
2.1 ,Uncond
1 )

The GENERAL suboptions apply to the General Options section of the Batch Reanalysis Options display.

JOBCARDSTYLE(P | S [, COND | UNCOND]))
JCSTY(P | S [, C | U])
Specifies the value for the Job card style field in the Batch Reanalysis Options display:
P
Parameters
S
Statements

If not specified, the default is P.

JCLEDIT(Y | N [, COND | UNCOND]))
JE(Y | N [, C | U])
Specifies the value for the Display panel to edit generated JCL field in the Batch Reanalysis Options display:
Y
Yes
N
No

If not specified, the default is N.

REDISP(Y | N [, COND | UNCOND]))
R(Y | N [, C | U])
Specifies the value for the Redisplay this panel before each reanalysis field in the Batch Reanalysis Options display:
Y
Yes
N
No

If not specified, the default is N.

BatchOpts JobCardParms suboptions

Figure 3. Syntax

1 JobCardParms ( + ,
2.1  Suffix (
2.2.1 suffix
2.2.1! A
2.2.1! ,Cond
2.2.1 ,Uncond
2.1 )
2.1  JobClass (
2.2.1 jclass
2.2.1! A
2.2.1! ,Cond
2.2.1 ,Uncond
2.1 )
2.1  Notify (
2.2.1! Y
2.2.1 N
2.2.1! ,Cond
2.2.1 ,Uncond
2.1 )
2.1  Time (
2.2.1 mins
2.2.1! 10
2.2.1! ,Cond
2.2.1 ,Uncond
2.1 )
2.1  MsgClass (
2.2.1 mclass
2.2.1! X
2.2.1! ,Cond
2.2.1 ,Uncond
2.1 )
2.1  Region (
2.2.1 mb
2.2.1! 0
2.2.1! ,Cond
2.2.1 ,Uncond
2.1 )
2.1  AcctInfo ( ai
2.2.1! ,Cond
2.2.1 ,Uncond
2.1 )
2.1! ,Cond
2.1 ,Uncond
1)

The JOBCARDPARMS suboptions apply to the Job Card Parameters section of the Batch Reanalysis Options display.

SUFFIX(suffix[, COND | UNCOND]))
S(suffix[, C | U])
Specifies the value of the Job name suffix field in the Batch Reanalysis Options display:
suffix
A-Z, 0-9, @, #, or $

If not specified, the default is A.

JOBCLASS(jclass[, COND | UNCOND]))
JC(jclass[, C | U])
Specifies the value for the Job class field in the Batch Reanalysis Options display:
jclass
A-Z or 0-9

If not specified, the default is A.

NOTIFY(Y | N [, COND | UNCOND]))
N(Y | N [, C | U])
Specifies the value for the Job notify field in the Batch Reanalysis Options display:
Y
Yes
N
No

If not specified, the default is Y.

TIME(mins[, COND | UNCOND]))
T(mins[, C | U])
Specifies the value for the Job time minutes field in the Batch Reanalysis Options display:
mins
0-99

If not specified, the default is 10.

MSGCLASS(mclass[, COND | UNCOND]))
MC(mclass[, C | U])
Specifies the value for the Message class field in the Batch Reanalysis Options display:
mclass
A-Z or 0-9

If not specified, the default is X.

REGION(mb[, COND | UNCOND]))
R(mb[, C | U])
Specifies the value for the Region megabytes field in the Batch Reanalysis Options display:
mb
0-2047

If not specified, the default is 0.

ACCTINFO(ai[, COND | UNCOND]))
AI(ai[, C | U])
Specifies the value for the Accounting info field in the Batch Reanalysis Options display:
ai
Up to 50 characters.

BatchOpts JobCardStmts suboptions

Figure 4. Syntax

1 JobCardStmts  ( stmt1 , stmt2 , stmt3 , stmt4
2.1! ,Cond
2.1 ,Uncond
1 )
You can specify up to four comma-delimited JCL statements.